ดอกเจียรคาร์ไบด์ MD6-1625 Cone Shape Super Cut

Carbide Burrs MD6-1625 Cone Shape Super Cut

Quick Overview

ดอกเจียรคาร์ไบด์ Super Cut คาร์ไบด์ผลิตจากเกรดพิเศษแตกต่างจากท้องตลาดทั่วไป

  • สามารถเจียรสแตนเลสที่เป็นเนื้อแข็งได้ที่ดอกทั่วไปไม่สามารถเจียรเข้าได้

  • ใช้ได้กับ งานโลหะ อโลหะ ไม้เนื้อแข็ง เหล็ก อัลลอยด์ ทองแดง

  • คอปเปอร์ไม้เนื้อแข็ง ออกแบบให้กัดชิ้นงานได้เร็วกว่าหินเจียรนัยแกนโดยไม่อุดตันที่ดอกกัด

  • สามารถใช้กับชิ้นงานเหล็กและสแตนเลส

  • เส้นผ่านศูนย์กลางของก้าน (D2) (Dia. of Shank) : 6 mm.   

  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์ (D1) (Dia. of Cutter) : 16 mm.

  • ความยาวช่วงกัด (L1) (Length of Cut) : 25 mm.

  • ความยาวรวม (L2) (Overall Lengt) : 70 mm.

ราคาปกติ ฿550.00 /ดอก ราคาพิเศษ ฿495.00 /ดอก
ลด 10%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
CTCBCUIN06SM1625
มีสินค้า

รายละเอียด

ดอกเจียรคาร์ไบด์ MD6-1625 Cone Shape Super Cut

Carbide Burrs MD6-1625 Cone Shape Super Cut

Drawing

ดอกเจียรคาร์ไบด์รูปทรง Cone Shape


 

 

 

 

  • เส้นผ่านศูนย์กลางของก้าน                        (D2) (Dia. of Shank)     :       6 mm.   
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์   (D1) (Dia. of Cutter)     :     16 mm.
  • ความยาวช่วงกัด                                         (L1) (Length of Cut)     :     25 mm.
  • ความยาวรวม                                              (L2) (Overall Lengt)      :     70 mm.

 

เหมาะสำหรับ

  • งานเจียร กัดเซาะร่อง แกะสลัก แต่งผิวชิ้นงาน หรือ ลบรอยเชื่อม

 

วิธีใช้

  • ใช้งานร่วมกับอุปกรณ์เครื่องเจียรมือ,เครื่องเจียรไฟฟ้าและเครื่องเจียรลม

 

 

สินค้าที่สามารถใช้ร่วมกับ ดอกเจียร ได้

เครื่องเจียรแม่พิมพ์แกน 6 มม. รุ่น DG906 SUMO (คลิกเพื่อสั่งซื้อ)

 

 

เครื่องเจียรแม่พิมพ์

 

    

DOUBLE CUT

  • Allows rapid stock removal and in ceased production rates. Effectively breaks down the chips as the material is removed, resulting in a smoother running burr.
  • Recommended materials
  • for working on mateials which produce long chips - soft steel, cast iron welds. Steel & Steel castings
  • Non-hardened, non-heat treated steels over 35 HRC 450 - 600 m/min
  • Hardened, heat treated steels over 35 HRC 250 - 350 m/min
  • Stainless Steels 250 - 350 m/min

 

Hardened non-ferrous metals

  • (Bronze, Titanium, Hard Aluminium)
  • Coarse machining (High stock removal) 250 - 350 m/min
  • Nickle based alloys 300 - 450 m/min
  • Cast iron 450 - 600 m/min

 

คำแนะนำในการใช้งาน

  • ควรปรับความเร็วรอบ ตามแผนภูมิหรือคู่มือ เพื่อให้บรรลุประสิทธิภาพสูงสุด
  • ควรใช้ความเร็วรอบต่ำสำหรับวัสดุที่มีความแข็ง
  • หัวเจียร์ขนาดเล็กควรใช้ความเร็วรอบสูง
  • รุ่นก้านยาวให้ใช้ความเร็วรอบต่ำเพื่อความปลอดภัย
  • เคลื่อนที่อย่างสม่ำเสมอและใช้แรงกดที่เบาเมื่อใช้งาน
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • การใช้เครื่องมือและจำปาที่ชำรุด จะทำให้บิ่นเร็วขึ้น
  • อย่าจมลายมากกว่าหนึ่งในสามของเส้นรอบวง

Recommendation For Use

  • It may be necessary to alter the running speeds form those shown in the speed chart in order to achieve optimum performance.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressire when using the burr.
  • Running below the optimum speed will cause chipping.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will encourage chipping.
  • Do not sink the burr for more than one third of its periphery.

 

 

คำเตือน

  • ควรสวมใส่อุปกรณ์ป้องกันทุกครั้ง

 

Warning

 

 

 

รายละเอียดสินค้า (Specification)

Cutter Diameter

16mm

Dia. Shank

6mm

Cutter Length

25mm

Total Length

70mm

0
Rating:
0% of 100
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:ดอกเจียรคาร์ไบด์ MD6-1625 Cone Shape Super Cut
คะแนนของคุณ