ดอกเจียรคาร์ไบด์ LA6-0616s Taper Radius End MAXICUT

Carbide Burrs LA6-0616s Taper Radius End MAXICUT

Quick Overview

ดอกเจียรคาร์ไบด์ คาร์ไบด์ผลิตจากเกรดพิเศษแตกต่างจากท้องตลาดทั่วไป ออกแบบมาให้ สามารถเจียรสแตนเลสที่เป็นเนื้อแข็งได้ที่ดอกทั่วไปไม่สามารถเจียรเข้าได้

  • ใช้ได้กับ งานโลหะ อโลหะ ไม้เนื้อแข็ง เหล็ก อัลลอยด์ ทองแดง คอปเปอร์ไม้เนื้อแข็ง 

  • ออกแบบให้กัดชิ้นงานได้เร็วกว่าหินเจียรนัยแกน โดยไม่อุดตันที่ดอกกัด

  • เส้นผ่านศูนย์กลางของก้าน (D2) (Dia. of Shank) : 6 mm.

  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์  (D1) (Dia. of Cutter) : 6 mm.

  • ความยาวช่วงกัด (L1) (Length of Cut) : 16 mm.

  • ความยาวรวม (L2) (Overall Lengt) : 51 mm.

ราคาปกติ ฿435.00 /ดอก ราคาพิเศษ ฿391.50 /ดอก
ลด 10%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
CTCBSL06SLAC0616S
มีสินค้า

รายละเอียด

ดอกเจียรคาร์ไบด์ LA6-0616s Taper Radius End MAXICUT

Carbide Burrs LA6-0616s Taper Radius End MAXICUT

 

Drawing

ดอกเจียรคาร์ไบด์รูปทรง Taper Radius End

 

 

 

  • เส้นผ่านศูนย์กลางของก้าน                   (D2) (Dia. of Shank)     :      6 mm.   
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์  (D1) (Dia. of Cutter)     :      6 mm.
  • ความยาวช่วงกัด                                (L1) (Length of Cut)     :     16 mm.
  • ความยาวรวม                                    (L2) (Overall Lengt)      :     51 mm.

 

เหมาะสำหรับ

  • งานเจียร กัดเซาะร่อง แกะสลัก แต่งผิวชิ้นงาน หรือ ลบรอยเชื่อม

 

วิธีใช้

  • ใช้งานร่วมกับอุปกรณ์เครื่องเจียรมือ,เครื่องเจียรไฟฟ้าและเครื่องเจียรลม

 

ALUMINIUM CUT

A general -  flute style burr is recommended for rapid stock removal on sofer, non-ferrous and non-metallic materials

Recommended materials

  • Aluminium, Magnesium and Zinc Alloys
  • Plastic
  • Hard Rubber
  • Wood
 

คำแนะนำในการใช้งาน

  • ควรปรับความเร็วรอบ ตามแผนภูมิหรือคู่มือ เพื่อให้บรรลุประสิทธิภาพสูงสุด
  • ควรใช้ความเร็วรอบต่ำสำหรับวัสดุที่มีความแข็ง
  • หัวเจียร์ขนาดเล็กควรใช้ความเร็วรอบสูง
  • รุ่นก้านยาวให้ใช้ความเร็วรอบต่ำเพื่อความปลอดภัย
  • เคลื่อนที่อย่างสม่ำเสมอและใช้แรงกดที่เบาเมื่อใช้งาน
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • การใช้เครื่องมือและจำปาที่ชำรุด จะทำให้บิ่นเร็วขึ้น
  • อย่าจมลายมากกว่าหนึ่งในสามของเส้นรอบวง

 

Recommendation For Use

  • It may be necessary to alter the running speeds form those shown in the speed chart in order to achieve optimum performance.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressire when using the burr.
  • Running below the optimum speed will cause chipping.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will encourage chipping.
  • Do not sink the burr for more than one third of its periphery.

 

คำเตือน

  • ควรสวมใส่อุปกรณ์ป้องกันทุกครั้ง

 

Warning

 

รายละเอียดสินค้า (Specification)

Cutter Diameter

6mm

Dia. Shank

6mm

Cutter Length

16mm

Total Length

51mm

0
Rating:
0% of 100
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:ดอกเจียรคาร์ไบด์ LA6-0616s Taper Radius End MAXICUT
คะแนนของคุณ