DT-125G series moisture meters are used for testing moisture in wood, concrete, cement, fiberglass ,plaster and building materials. Integrated characteristics for 8 material groups increase the accuracy of measurements. The wet/dry indicator evaluates and interprets measurements with respect to the given material. The clearly organized, functional display and rubber guard around the housing make this unit well-suited for use in the rough professional environment.DT-125G can meet with different measuring requirements with various professional remote probes
1.Low battery charge (แบตเตอรี่ต่ำ) 2.Set menu indicator: “LIGHT” for setting backlight mode. “TEMP” for setting compensate temperature, “UNIT” for setting ambient temperature unit. (ตัวบ่งชี้เมนู “LIGHT” สำหรับการตั้งค่าโหมดแบล๊คไลท์ TEMP” สำหรับตั้งค่าชดเชยอุณหภูมิ “UNIT” สำหรับการตั้งค่าหน่วยอุณหภูมิ 3.TEST measure mode (โหมดการวัดการทดสอบ) 4.Bar-graph display of measured MIN/MAX values (การแสดงกราฟแท่งของค่าMIN / MAX ที่วัดได้) 5.DRY/MOIST/WET indicator (programmable) ตัวบ่งชี้แห้ง/ชื้น/เปียก 6.Wood group (W1, W2, W3) กลุ่มไม้ (W1, W2 W3) 7.Building materials (B1, B2, B3, B4) วัสดุก่อสร้าง (B1, b2, B3, B4) 8.Digital display of materials moist จอแสดงผลดิจิตอลของวัสดุที่ชื้น 9.Bar-graph display of materials moist value การแสดงกราฟแท่งของค่าความชื้นของวัสดุ 10.Digital Display of ambient Temperature & Humidity จอแสดงผลดิจิตอลของอุณหภูมิและความชื้นสัมพัทธ์
3.Power On/OFFปุ่มเปิด/ปิด
Press the “MODE” for about 2s, the device will power on, when the device is active, the display will show the ambient will power off. The device will auto power off after 3 minutes
4.Measuring ambient Temperature & Humidityการวัดอุณหภูมิและความชื้น
The device measures the ambient temperature & humidity while measuring moisture, and the ambient temperature is used as temperature compensation to increase the moisture accuracy. Press the “Set” key for about 2s, the display will switch between Temperature and humidity. And you can change the temperature unit between ๐C and ๐F in setting menu. เครื่องวัดอุณหภูมิและความชื้นขณะใช้วัดความชื้นและอุณหภูมิโดยรอบ ใช้ทดแทนอุณหภูมิเพื่อเพิ่มความแม่นยำของความชื้น
Relative material moisture is dependent on the temperature of the material. The device automatically compensates different material temperatures in that it measures ambient temperature and use this measurement for its internal calculation.
In addition, the measuring device else offer an option for setting the temperature manual to increase measuring accuracy. This value is not stored and must be set again each time the device is switched on.
ไฟแสงสว่างของจอแสดงผล LED สามารถปรับเปลี่ยนได้ด้วยการตั้งค่า 3 แบบ