ดอกเจียรคาร์ไบด์ BD6-1625 End Cut Super Cut

Carbide burr BD6-1625 End Cut Super Cut

Quick Overview

ดอกเจียรคาร์ไบด์ BD6-1625 ใช้ได้กับ งานโลหะ อโลหะ ไม้เนื้อแข็ง เหล็ก อัลลอยด์ ทองแดง คอปเปอร์ไม้เนื้อแข็ง

  • ดอกเจียรคาร์ไบด์รูปทรง B คาร์ไบด์ทั้งหัว และแกน
  • ผลิตจากเกรดพิเศษแตกต่างจากท้องตลาดทั่วไป ออกแบบมาให้
  • สามารถเจียรสแตนเลสที่เป็นเนื้อแข็งได้ที่ดอกทั่วไปไม่สามารถเจียรเข้าได้
  • ออกแบบให้กัดชิ้นงานได้เร็วกว่าหินเจียรนัยแกน โดยไม่อุดตันที่ดอกกัด
ราคาปกติ ฿900.00 /ดอก ราคาพิเศษ ฿810.00 /ดอก
ลด 10%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
CTCBCUIN06SB1625
มีสินค้า


ดอกเจียรคาร์ไบด์

ดอกเจียรคาร์ไบด์ BD6-1625 End Cut Super Cut

Carbide burr BD6-1625 End Cut Super Cut

 

 

Drawing

ดอกเจียรคาร์ไบด์รูปทรง End cut

 

 

  • เส้นผ่านศูนย์กลางของก้าน                      (D2) (Dia. of Shank)     :       6 mm.    
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์ (D1) (Dia. of Cutter)     :     16 mm.
  • ความยาวช่วงกัด                                       (L1) (Length of Cut)     :    25 mm.
  • ความยาวรวม                                            (L2) (Overall Lengt)      :    64 mm.

 

เหมาะสำหรับ

  • งานเจียร กัดเซาะร่อง แกะสลัก แต่งผิวชิ้นงาน หรือ ลบรอยเชื่อม

วิธีใช้

 

  • ใช้งานร่วมกับอุปกรณ์เครื่องเจียรมือ,เครื่องเจียรไฟฟ้าและเครื่องเจียรลม

 



DOUBLE CUT

Allows rapid stock removal and in ceased production rates. Effectively breaks down the chips as the material is removed, resulting in a smoother running burr.

  • Recommended materials
  • for working on mateials which produce long chips - soft steel, cast iron welds.

Steel & Steel castings

  • Non-hardened, non-heat treated steels over 35 HRC 450 - 600 m/min
  • Hardened, heat treated steels over 35 HRC 250 - 350 m/min
  • Stainless Steels 250 - 350 m/min

Hardened non-ferrous metals

  • (Bronze, Titanium, Hard Aluminium)
  • Coarse machining (High stock removal) 250 - 350 m/min
  • Nickle based alloys 300 - 450 m/min
  • Cast iron 450 - 600 m/min

 

 

คำแนะนำในการใช้งาน

 

  • ควรปรับความเร็วรอบ ตามแผนภูมิหรือคู่มือ เพื่อให้บรรลุประสิทธิภาพสูงสุด
  • ควรใช้ความเร็วรอบต่ำสำหรับวัสดุที่มีความแข็ง
  • หัวเจียร์ขนาดเล็กควรใช้ความเร็วรอบสูง
  • รุ่นก้านยาวให้ใช้ความเร็วรอบต่ำเพื่อความปลอดภัย
  • เคลื่อนที่อย่างสม่ำเสมอและใช้แรงกดที่เบาเมื่อใช้งาน
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • การใช้เครื่องมือและจำปาที่ชำรุด จะทำให้บิ่นเร็วขึ้น
  • อย่าจมลายมากกว่าหนึ่งในสามของเส้นรอบวง

 

 

Recommendation For Use

 

  • It may be necessary to alter the running speeds form those shown in the speed chart in order to achieve optimum performance.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressire when using the burr.
  • Running below the optimum speed will cause chipping.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will encourage chipping.
  • Do not sink the burr for more than one third of its periphery.

 

คำเตือน

  • ควรสวมใส่อุปกรณ์ป้องกันทุกครั้ง

 

Warning

 

รายละเอียดสินค้า (Specification)

Cutter Diameter

16mm

Dia. Shank

6mm

Cutter Length

25mm

Total Length

64mm

0
Rating:
0% of 100
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:ดอกเจียรคาร์ไบด์ BD6-1625 End Cut Super Cut
คะแนนของคุณ