ดอกเจียรคาร์ไบด์ GD6-1225 Pointed Tree Super Cut

Carbide Burrs GD6-1225 Pointed Tree Super Cut

Quick Overview

ดอกเจียร

ดอกเจียรคาร์ไบด์ หัวเจียรคาร์ไบด์ Super Cut

คาร์ไบด์ ผลิตจากเกรดพิเศษแตกต่างจากท้องตลาดทั่วไปออกแบบมาให้

สามารถเจียรสแตนเลสที่เป็นเนื้อแข็งได้ที่ดอกทั่วไปไม่สามารถเจียรเข้าได้

  • ใช้ได้กับ งานโลหะ อโลหะ ไม้เนื้อแข็ง เหล็ก อัลลอยด์ ทองแดง
  • คอปเปอร์ไม้เนื้อแข็ง ออกแบบให้กัดชิ้นงานได้เร็วกว่าหินเจียรนัยแกนโดยไม่อุดตันที่ดอกกัด

     - Use for narrow contours Work & milling

  • เส้นผ่านศูนย์กลางของก้าน                      (D2) (Dia. of Shank)     :      6 mm.    
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์ (D1) (Dia. of Cutter)     :    12 mm.
  • ความยาวช่วงกัด                                       (L1) (Length of Cut)     :    25 mm.
  • ความยาวรวม                                            (L2) (Overall Lengt)      :    70 mm.

ราคาปกติ ฿400.00 /ดอก ราคาพิเศษ ฿360.00 /ดอก
ลด 10%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
CTCBCUIN06SG1225
มีสินค้า

รายละเอียด

ดอกเจียรคาร์ไบด์ GD6-1225 Pointed Tree Super Cut

Carbide Burrs GD6-1225 Pointed Tree Super Cut




Drawing

ดอกเจียรคาร์ไบด์รูปทรง Pointed Tree



  • เส้นผ่านศูนย์กลางของก้าน                      (D2) (Dia. of Shank)     :      6 mm.    
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์ (D1) (Dia. of Cutter)     :    12 mm.
  • ความยาวช่วงกัด                                       (L1) (Length of Cut)     :    25 mm.
  • ความยาวรวม                                            (L2) (Overall Lengt)      :    70 mm.


เหมาะสำหรับ

  • งานเจียร กัดเซาะร่อง แกะสลัก แต่งผิวชิ้นงาน หรือ ลบรอยเชื่อม

วิธีใช้

  • ใช้งานร่วมกับอุปกรณ์เครื่องเจียรมือ,เครื่องเจียรไฟฟ้าและเครื่องเจียรลม


DOUBLE CUT

  • Allows rapid stock removal and in ceased production rates. Effectively breaks down the chips as the material is removed, resulting in a smoother running burr.
  • Recommended materials
  • for working on mateials which produce long chips - soft steel, cast iron welds.

Steel & Steel castings

  • Non-hardened, non-heat treated steels over 35 HRC 450 - 600 m/min
  • Hardened, heat treated steels over 35 HRC 250 - 350 m/min
  • Stainless Steels 250 - 350 m/min
Hardened non-ferrous metals

  • (Bronze, Titanium, Hard Aluminium)
  • Coarse machining (High stock removal) 250 - 350 m/min
  • Nickle based alloys 300 - 450 m/min
  • Cast iron 450 - 600 m/min

คำแนะนำในการใช้งาน

  • ควรปรับความเร็วรอบ ตามแผนภูมิหรือคู่มือ เพื่อให้บรรลุประสิทธิภาพสูงสุด
  • ควรใช้ความเร็วรอบต่ำสำหรับวัสดุที่มีความแข็ง
  • หัวเจียร์ขนาดเล็กควรใช้ความเร็วรอบสูง
  • รุ่นก้านยาวให้ใช้ความเร็วรอบต่ำเพื่อความปลอดภัย
  • เคลื่อนที่อย่างสม่ำเสมอและใช้แรงกดที่เบาเมื่อใช้งาน
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • การใช้เครื่องมือและจำปาที่ชำรุด จะทำให้บิ่นเร็วขึ้น
  • อย่าจมลายมากกว่าหนึ่งในสามของเส้นรอบวง


Recommendation For Use

  • It may be necessary to alter the running speeds form those shown in the speed chart in order to achieve optimum performance.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressire when using the burr.
  • Running below the optimum speed will cause chipping.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will encourage chipping.
  • Do not sink the burr for more than one third of its periphery.


คำเตือน

  • ควรสวมใส่อุปกรณ์ป้องกันทุกครั้ง

Warning


    รายละเอียดสินค้า (Specification)

    Cutter Diameter

    12mm

    Dia. Shank

    6mm

    Cutter Length

    25mm

    Total Length

    70mm

    0
    Rating:
    0% of 100
    เขียนรีวิวสินค้าของคุณเอง
    คุณกำลังรีวิว:ดอกเจียรคาร์ไบด์ GD6-1225 Pointed Tree Super Cut
    คะแนนของคุณ