ที่ดูดตะกั่ว รุ่น 880 SUMO

Solder Sucker Mod.880 SUMO

Quick Overview

ที่ดูดตะกั่ว สามารถดูดตะกั่วได้มาก สปริงที่มีคุณภาพ ใช้งานง่าย ประสิทธิภาพในการดูดสูง

  • ทำความสะอาดง่าย เพียงกดปุ่มที่ด้ามจับค้างไว้
  • ตัวดูดตะกั่ว มั่นใจได้ในความปลอดภัยระหว่างการใช้งาน
  • มีแท่งดันเศษตะกั่วออกจากปลายดูด
  • 50/กล่อง 100/ลัง

 

 

 

ราคาปกติ ฿95.00 /อัน ราคาพิเศษ ฿76.00 /อัน
ลด 20%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
TLSOSK880
มีสินค้า

ที่ดูดตะกั่ว

ที่ดูดตะกั่ว รุ่น 880 SUMO

Solder Sucker Mod.880 SUMO


ที่ดูดตะกั่ว

ที่ดูดตะกั่ว รุ่น 880 SUMO

Solder Sucker Mod.880 SUMO

 

คุณสมบัติ (Feature)

  • ที่ดูดตะกั่ว สามารถดูดตะกั่วได้มาก สปริงที่มีคุณภาพ ใช้งานง่าย ประสิทธิภาพในการดูดสูง

  • ทำความสะอาดง่าย เพียงกดปุ่มที่ด้ามจับค้างไว้

  • ตัวดูดตะกั่ว มั่นใจได้ในความปลอดภัยระหว่างการใช้งาน

  • มีแท่งดันเศษตะกั่วออกจากปลายดูด

  • Large capacity, powerful spring, simple operation, powerful solder sucker.

  • One-touched cylinder and holder, which are easy to clean

  • The pretectoo ca make you safe to operate it

  • Cleaned shaft can help the nozzle to remove the solder.

 

 

 

วิธีการใช้งาน (How to use)

  • ดันแกนลูกสูบให้สุด

  • หลอมตะกั่วที่ต้องการเอาออก

  • นำปลายดูดไปยังตะกั่วที่ถูกหลอม หลังจากน้ำกดปุ่มปลดล็อค เศษตะกั่วที่ละลายจะถูกดูดเข้าไป

  • ดันแกนลูกสูบให้สุด เพื่อกำจัดเศษตะกั่วที่ติดอยู่ตรงปลายดูด และเริ่มการทำงานใหม่อีกครั้ง

  • Push the set-knob for loading the cleaned shaft until the knob stops

  • Melt the solder where it is intended to remove

  • Aim the nozzle to the melted solder and then push the release button. Thus the solder can be sucked.

  • Push the set-knob and then pull the protector. the load mechanism is released

 

 
 

การดูแลรักษา (Maintenance)

  • ดันก้านสูบจนกระทั่งหยุด หลังจากนั่นถอดปลายหัวดูดออก

  • แยกชิ้นส่วนโดยการ จับกระบอกสูบและแกนเพลาสให้แน่น และหมุนทวนเข็มนาฬิกา

  • ทำความสะอาดลูกสูบและภายในกระบอกสูบด้วยแปรง หลังจากนั้นทำการหยอดน้ำมันหล่อลื่น

  • โปรดใช้ความระมัดระวังในการตรวจสอบและเปลี่ยนท่อดูดเมื่อจำเป็นเนื่องจากความร้อนที่สูงจะทำให้หัวดูดชำรุดได้ง่าย

  • Push the set-knob until it stops and then take down the nozzle

  • stuff the nozzle tight the cylinder holder, then press it gently toward the holder.

  • Be careful to examine and replace the nozzle if necessary because the nozzle might be damaged if the solder is too  hot.

          

รายละเอียด (Specifications)

เส้นผ่านศูนย์กลาง (Diameter)

18 mm.

หัวฉีด (Nozzle)

3.2 mm.

ความสูง (Height)

330 mm.

น้ำหนัก (Weight)

82 g.

 

คำเตือน (Warning)

  • ห้ามถอดแยกชิ้นส่วนผลิตภัณฑ์นี้

  • Don't take the nozzle mechanically.

ที่ดูดตะกั่ว รุ่น 880 SUMO

Solder Sucker Mod.880 SUMO

 

คุณสมบัติ (Feature)

  • ที่ดูดตะกั่ว สามารถดูดตะกั่วได้มาก สปริงที่มีคุณภาพ ใช้งานง่าย ประสิทธิภาพในการดูดสูง

  • ทำความสะอาดง่าย เพียงกดปุ่มที่ด้ามจับค้างใว้

  • ตัวดูดตะกั่ว มั่นใจได้ในความปลอดภัยระหว่างการใช้งาน

  • มีแท่งดันเศษตะกั่วออกจากปลายดูด

  • Large capacity, powerful spring, simple operation, powerful solder sucker.

  • One-touched cylinder and holder, which are easy to clean

  • The pretectoo ca make you safe to operate it

  • Cleaned shaft can help the nozzle to remove the solder.

 

วิธีการใช้งาน (Operation)

  • ดันแกนลูกสูบให้สุด

  • หลอมตะกั่วที่ต้องการเอาออก

  • นำปลายดูดไปยังตะกั่วที่ถูกหลอม หลังจากน้ำกดปุ่มปลดล็อค เศษตะกั่วที่ละลายจะถูกดูดเข้าไป

  • ดันแกนลูกสูบให้สุด เพื่อกำจัดเศษตะกั่วที่ติดอยู่ตรงปลายดูด และเริ่มการทำงานใหม่อีกครั้ง

  • Push the set-knob for loading the cleaned shaft until the knob stops

  • Melt the solder where it is intended to remove

  • Aim the nozzle to the melted solder and then push the release button. Thus the solder can be sucked.

  • Push the set-knob and then pull the protector. the load mechanism is released

 

การดูแลรักษา (Maintenance)

  • ดันก้านสูบจนกระทั่งหยุด หลังจากนั่นถอดปลายหัวดูดออก

  • แยกชิ้นส่วนโดยการ จับกระบอกสูบและแกนเพลาสให้แน่น และหมุนทวนเข็มนาฬิกา

  • ทำความสะอาดลูกสูบและภายในกระบอกสูบด้วยแปรง หลังจากนั้นทำการหยอดน้ำมันหล่อลื่น

  • โปรดใช้ความระมัดระวังในการตรวจสอบและเปลี่ยนท่อดูดเมื่อจำเป็นเนื่องจากความร้อนที่สูงจะทำให้หัวดูดชำรุดได้ง่าย

  • Push the set-knob until it stops and then take down the nozzle

  • stuff the nozzle tight the cylinder holder, then press it gently toward the holder.

  • Be careful to examine and replace the nozzle if necessary because the nozzle might be damaged if the solder is too  hot.

       

คำเตือน (Warning)

  • ห้ามถอดแยกชิ้นส่วนผลิตภัณฑ์นี้

  • Don't take the nozzle mechanically.

รายละเอียด (Specifications)

เส้นผ่านศูนย์กลาง (Diameter)

18 mm.

หัวฉีด (Nozzle)

3.2 mm.

ความสูง (Height)

330 mm.

น้ำหนัก (Weight)

82 g.

 

0
Rating:
0% of 100
เขียนรีวิวสินค้าของคุณเอง
คุณกำลังรีวิว:ที่ดูดตะกั่ว รุ่น 880 SUMO
คะแนนของคุณ