Working Angle: Position the grinding disc at approximately 15 ∘ to the workpiece for maximum efficiency.
Grinding Method: Allow the machine to reach maximum speed first. Then, apply light pressure and move the machine forward and backward with caution.
Holding Technique: Do not use the grinder with only one hand.
Spark/Debris Caution: To avoid sparks and debris flying towards you, rotate the machine's direction and choose the appropriate gripping method.
Note: Sparks will occur when grinding metal. Never allow debris to contact flammable materials to prevent fire.
Kick-back Function: This safety system reduces the risk of kick-back when the grinding disc jams. The system detects the snag and instantly shuts down the motor to prevent injury and property damage
Please read and follow the safety instructions provided with the tool at all times to prevent potential hazards.
1. Personal Safety
Wear Protective Gear: Use appropriate personal protective equipment, including safety glasses, a dust mask, gloves, and safety shoes, suitable for the task.
Dress Code: Do not wear loose clothing, necklaces, rings, or scarves that could get caught in the rotating parts of the machine.
Maintain Balance: Stand firmly and control the tool fully with both hands at all times.
Physical Condition: Do not operate the tool when tired, drowsy, or under the influence of medication, as a brief lack of attention can lead to accidents.
Heat: Do not use the tool continuously for too long until it overheats. Stop and allow the tool to cool down periodically to prevent damage and potential hazards.
2. Electrical and Work Area
Safety Work Area: Work in an area with sufficient lighting and ventilation.
Environment: Do not use the power tool in areas with flammable materials, such as liquids, gases, or dust that could be ignited by sparks.
Moisture Protection: Avoid contact with grounded surfaces like water pipes, radiators, or refrigerators, and do not use the power tool in damp or wet conditions.
3. Tool Use and Care
Holding: Grip the power tool only by the insulated gripping surfaces (the handle).
Blades/Accessories: Use accessories suitable for the job and do not modify them.
Pre-Use Check: Ensure the switch is in the OFF position before connecting the battery or lifting/moving the tool.
Storage: Always disconnect the battery from the tool when not in use, and store the tool out of the reach of children or untrained persons.
1.เจียร ตัด ขัด ถู 
2.งานเชื่อม ตัดพลาสม่า 
3.อุปกรณ์เพื่อความปลอดภัย 
4.เจาะ เซาะ กัด เลื่อย 
5.เครื่องมือวัด 
6.อุปกรณ์ไฟฟ้า 
7.อุปกรณ์ลม 
8.เครื่องมือไฟฟ้า 
9.ปั๊มน้ำ เครื่องอัดฉีด 
10.อุปกรณ์ดูแลรถยนต์ 
11.เคมีภัณฑ์ 
12.เครื่องมือ 
13.เครื่องจักร 
