ดอกเจียรคาร์ไบด์ FD6-1225 Round Nose Tree Super Cut

Carbide Burrs FD6-1225 Round Nose Tree Super Cut

Quick Overview

ดอกเจียรคาร์ไบด์  FD6-1225 Round Nose Tree MAXICUT

คาร์ไบด์ผลิตจากเกรดพิเศษแตกต่างจากท้องตลาดทั่วไป ออกแบบมาให้
สามารถเจียรสแตนเลสที่เป็นเนื้อแข็งได้ที่ดอกทั่วไปไม่สามารถเจียรเข้าได้
ใช้ได้กับ งานโลหะ อโลหะ ไม้เนื้อแข็ง เหล็ก อัลลอยด์ ทองแดง คอปเปอร์ไม้เนื้อแข็ง
ออกแบบให้กัดชิ้นงานได้เร็วกว่าหินเจียรนัยแกน โดยไม่อุดตันที่ดอกกัด


    

 -  Work on narrow contours, Use Milling of acute-angled surfaces  


  • เส้นผ่านศูนย์กลางของก้าน                           (D2) (Dia. of Shank) :     6 mm.
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์      (D1) (Dia. of Cutter) :    12 mm.
  • ความยาวช่วงกัด                                            (L1) (Length of Cut) :     25 mm.
  • ความยาวรวม                                                 (L2) (Overall Length)  :    70 mm.

ราคาปกติ ฿440.00 /ดอก ราคาพิเศษ ฿396.00 /ดอก
ลด 10%
(ราคาสินค้ารวมภาษีมูลค่าเพิ่มแล้ว)
ราคารวมค่าขนส่งแล้ว
SKU
CTCBCUIN06SF1225
มีสินค้า

รายละเอียด

ดอกเจียรคาร์ไบด์ FD6-1225 Round Nose Tree  Super Cut

Carbide Burrs FD6-1225 Round Nose Tree Super Cut




Drawing

ดอกเจียรคาร์ไบด์ รูปทรง  Round Nose Tree



  • เส้นผ่านศูนย์กลางของก้าน                            (D2) (Dia. of Shank) :     6 mm.
  • เส้นผ่านศูนย์กลางของดอกเจียรคาร์ไบด์      (D1) (Dia. of Cutter) :    12 mm.
  • ความยาวช่วงกัด                                            (L1) (Length of Cut) :     25 mm.
  • ความยาวรวม                                                 (L2) (Overall Length)  :    70 mm.


เหมาะสำหรับ

  • งานเจียร กัดเซาะร่อง แกะสลัก แต่งผิวชิ้นงาน หรือ ลบรอยเชื่อม


วิธีใช้

  • ใช้งานร่วมกับอุปกรณ์เครื่องเจียรมือ,เครื่องเจียรไฟฟ้าและเครื่องเจียรลม




DOUBLE CUT

Allows rapid stock removal and in ceased production rates. Effectively breaks down the chips as the material is removed, resulting in a smoother running burr.

  • Recommended materials
  • for working on materials which produce long chips - soft steel, cast iron welds.

Steel & Steel castings

  • Non-hardened, non-heat treated steels over 35 HRC 450 - 600 m/min
  • Hardened, heat treated steels over 35 HRC 250 - 350 m/min
  • Stainless Steels 250 - 350 m/min

Hardened non-ferrous metals

  • (Bronze, Titanium, Hard Aluminium)
  • Coarse machining (High stock removal) 250 - 350 m/min
  • Nickle based alloys 300 - 450 m/min
  • Cast iron 450 - 600 m/min


คำแนะนำในการใช้งาน

  • ควรปรับความเร็วรอบ ตามแผนภูมิหรือคู่มือ เพื่อให้บรรลุประสิทธิภาพสูงสุด
  • ควรใช้ความเร็วรอบต่ำสำหรับวัสดุที่มีความแข็ง
  • หัวเจียร์ขนาดเล็กควรใช้ความเร็วรอบสูง
  • รุ่นก้านยาวให้ใช้ความเร็วรอบต่ำเพื่อความปลอดภัย
  • เคลื่อนที่อย่างสม่ำเสมอและใช้แรงกดที่เบาเมื่อใช้งาน
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • ความเร็วรอบที่ต่ำกว่าที่ระบุไว้ อาจทำให้เกิดการบิ่น
  • การใช้เครื่องมือและจำปาที่ชำรุด จะทำให้บิ่นเร็วขึ้น
  • อย่าจมลายมากกว่าหนึ่งในสามของเส้นรอบวง


Recommendation For Use

  • It may be necessary to alter the running speeds form those shown in the speed chart in order to achieve optimum performance.
  • Harder materials require slower running speeds.
  • Smaller burrs require faster running speeds.
  • Long shank burrs require slower speeds for safety reasons.
  • Apply constant movement and light pressure when using the burr.
  • Running below the optimum speed will cause chipping.
  • Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
  • Using tools and collets which have become worn will encourage chipping.
  • Do not sink the burr for more than one third of its periphery.


คำเตือน

  • ควรสวมใส่อุปกรณ์ป้องกันทุกครั้ง


Warning

    รายละเอียดสินค้า (Specification)

    Cutter Diameter

    12mm

    Dia. Shank

    6mm

    Cutter Length

    25mm

    Total Length

    70mm

    0
    Rating:
    0% of 100
    เขียนรีวิวสินค้าของคุณเอง
    คุณกำลังรีวิว:ดอกเจียรคาร์ไบด์ FD6-1225 Round Nose Tree Super Cut
    คะแนนของคุณ