คุณสามารถตรวจสอบค่าอุณหภูมิและความชื้นได้อย่างมีประสิทธิภาพและสะดวกสบายเป็นเวลานานโดยใช้เครื่องบันทึกข้อมูล การอ่านจะถูกบันทึกไว้ในเครื่องบันทึกและเพียงอ่านจากเครื่องคอมพิวเตอร์ของคุณด้วย USB จอ LCD สามารถแสดงค่าที่อ่านได้ในปัจจุบัน, MAX, MIN, TIME, DATE และค่าอุณหภูมิหรือความชื้น
The temperature & Humidity Datalogger is designed with a high accuracy Temperature & Humidity Sensor. This datalogger is provided with features of high accuracy, fast response and stability. It is widely used for monitoring and collecting data of environment temperature and humidity.
You can monitor temperature and humidity values efficiently and conveniently for long time periods by using the Datalogger. The readings are saved in the logger and simply read out by your PC with USB. The LCD can show current readings, MAX, MIN, TIME, DATE and temperature or humidity values.
This Datalogger should be vertical placed . After measurement, the Datalogger should be vertical placed . If the Datalogger is connected to the PC, some battery power can be saved.
The display screen and buttons show the measurement results, click to see the various measurement values of the device. Exp; Measurement resolution the display of alarm values will be set through the program on the computer. By referring to the file on the program disk
Press the MAX / MIN button to view the maximum and minimum value in the recording. If the button doesn’t work within 40s the device will return to normal measurement.
Time and date are shown automatically every 10 seconds.
When the data is loaded onto the computer, the display will show –PC-. And when download the data finish the device will show the final value. Ready to stop recording.
The REC light will wink when the data is being recorded.
Alarm!! When the measured value is higher or lower than the alarm light set will wink.
The display will show LO the user must be checking the Sensor promptly
Should be place the machine in a vertical manner
In the case of using the machine in a cold and high humidity area. Should place the machine vertically and dry.
ฟังก์ชั่น เตือน เมื่อค่าที่วัดได้เกินขีดจำกัดสูงสุดที่ตั้งไว้หรือขีดจำกัดต่ำสุด LED ไฟเตือนจะกะพริบหนึ่งครั้งต่อนาที การกะพริบไฟ LED สีแดงแสดงค่าอุณหภูมิเกินขีดจำกัด ในขณะที่ การกะพริบไฟ LED สีเหลืองแสดงค่าความชื้นเกินขีดจำกัด
Battery sign .When battery is exhausted, sign will be displayed. At this time, replacing a new battery is necessary. The useful life of the battery is more than 3 months.
TIME currently time
DATE currently data
Time and date are automatically switch mode, And it will switch for every 10s
MAX display maximum value during measuring
MIN display minimum value during measuring
REC this sign showing that the data logger is under recording
FULL this sign showing that the memorizer is full, the data logger will stop recording
%RH this sign showing that the data logger is measuring humidity
C°Centigrade
F° Fahrenheit
When press the MAX / MIN button, it will hold MAX, MIN, time and date. The time and date is also switched for every 10s. If you do not press any key in 40s, the meter will automatically exit from the MAX MIN mode, and return to the data hold and measure mode.
When loading the data, there will be “-PC-“ sign displayed on the LCD. After all the data are loaded, the data logger will display the real value from current measurement. But it will stop recording. The logger need to be re-set if you need the recording function. You can only look over the data from the logger itself. All setting will be only carried through the software installed in PC.
Alarm function
When the measured value exceeds the set upper limit or lower limit, the alarm LED will wink one time per minute. Winking Red LED shows temperature value exceeds limit, while winking Yellow LED shows humidity value exceeds limit.
There will be “-LO-“ sign displayed if the temperature / humidity sensor is not well connected. At this time. Please open the back cover and re-install the sensor. Until the correct measurement value is displayed.
หลังจากติดตั้งซอฟต์แวร์แล้วให้เก็บซีดีไว้ในซีดีรอมและเชื่อมต่อตัวบันทึกข้อมูลกับพีซีด้วยสาย USB จากนั้นจะมีหน้าต่างการติดตั้งไดรเวอร์ USB ปรากฏขึ้น ตามด้วย clew ให้เลือกส่วนของซีดีไดรเวอร์และคุณจะได้ทำการติดตั้งไดรเวอร์ USB ให้เสร็จสิ้นในไม่ช้า
Put the CD into the CD-ROM, there will be installation interface pop-up after a moment. You can install the software to your PC accordingly.
After the software is installed, keep the CD in the CD-ROM and connect the datalogger with the PC by the USB cable. Then, there will be a USB Driver installation window pop-up. Follow with the clew, select the part of CD driver and you will finish the USB driver installation very soon.
การใช้ซอฟต์แวร์ (Software application)
ระบบ Datalogger USB เป็นโปรแกรมสำหรับรวบรวมข้อมูลจาก DATA LOGGER เมื่อเชื่อมต่อกับพีซีหรือคอมพิวเตอร์ โน้ตบุ๊ค ข้อมูลอาจแสดงเป็นกราฟิกเช่น Excel หรือโปรแกรมที่คล้ายกัน ฟังก์ชั่นที่สำคัญมีการระบุไว้ทั้งหมดในหน้าต่างหลัก
The Datalogger USB software is a program for collecting data from the DATA LOGGER when it is connected to a PC or notebook computer. The data may be displayed graphically, as Excel or similar programs. The major functions are all listed in the main window.
ระบบต้องการ (System Required)
Windows 2000 or Windows XP or Vista
ข้อควรแนะนำ (Suggestion)
ควรวางเครื่องนี้ในแนวตั้ง
This Datalogger should be vertical place.
คำเตือน (Warning)
อย่าให้เครื่องเปียกน้ำและควรเก็บในที่แห้ง
Do not this datalogger to wet and should be keeping dry place.